Slope & Swivel Range

Showing 19 of 19 results
  • 125-H - Two Way Swivel Elbow Clamp Fitting

    125-H - Two Way Swivel Elbow Clamp Fitting

    £4.90 £5.88 (inc. VAT) £15.88
    125H fitting has been designed as a variable angle in-line connection, adjustable through 202. Powder coating from only £2.00 per fitting.
  • 129 Adjustable Tee Clamp Fitting

    129 Adjustable Tee Clamp Fitting

    £1.80 £2.16 (inc. VAT)
    Adjustable from 30° to 60°, often used on staircase top rails . The through tube cannot be joined within the fitting. Powder coating from only £2.00 per fitting.
  • 130 - Adjustable Cross Clamp Fitting

    130 - Adjustable Cross Clamp Fitting

    £4.50 £5.40 (inc. VAT)
    Adjustable from 30° to 45°, this Q-Clamp fitting is often used where middle rails on staircases meet intermediate uprights. Powder coating from only £2.00 per fitting.
  • 147- Offset Swivel Tee Clamp Fitting

    147- Offset Swivel Tee Clamp Fitting

    £2.90 £3.48 (inc. VAT) £9.39
    An internal swivel tee used in conjunction with other Q clamp fittings in the range to create a 360° swivel joint. Ideal use on handrail or offset guardrailing down variable angled slopes. Eliminates the requirement for specialised angle fittings. Powder coating from only £2.00 per fitting.
  • 148 - Short Swivel Inline Tee Clamp Fitting

    148 - Short Swivel Inline Tee Clamp Fitting

    £3.15 £3.78 (inc. VAT) £5.41
    Sold in packs of 2 as per image used in pairs to create angles between 85° and 235°. A central tube is required to join the fittings together to create the angle. When working out the correct tube length dimension ‘C’ should be subtracted. Powder coating from only £2.00 per fitting.
  • 167 - Double In-Line Swivel Combination Clamp Fitting

    167 - Double In-Line Swivel Combination Clamp Fitting

    £4.40 £5.28 (inc. VAT) £14.00
    Complete double swivel with the swivel connectors at 180° to each other. Each swivel has a travel of approximately 85° from the horizontal in both vertical directions. Powder coating from only £2.00 per fitting.
  • 168 - Corner Swivel Clamp Fitting

    168 - Corner Swivel Clamp Fitting

    £4.70 £5.64 (inc. VAT) £1,518.00
    90 degree corner swivel complete double swivel with a swivel connection at 90o to each other. Each swivel has a travel of approximately 85o from the horizontal on both vertical directions. Powder coating from only £2.00 per fitting.
  • 169 - Swivel Locating Flange Clamp Fitting

    169 - Swivel Locating Flange Clamp Fitting

    £2.80 £3.36 (inc. VAT) £925.00
    Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction. Powder coating from only £2.00 per fitting.
  • 173 - Single swivel Clamp Fitting

    173 - Single swivel Clamp Fitting

    £2.40 £2.88 (inc. VAT) £7.95
    Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions. Powder coating from only £2.00 per fitting.
  • 173F - Female Swivel Clamp Fitting

    173F - Female Swivel Clamp Fitting

    £1.15 £1.38 (inc. VAT) £3.85
    This fitting is designed to be used in conjunction with the M fittings and is generally not used on its own. This can be connected to the M fitting by rivet or nut and bolt. For example it will fit 167M, 168M and 169M. Powder coating from only £2.00 per fitting.
  • 201(153) - Slope Range Short Tee Clamp Fitting

    201(153) - Slope Range Short Tee Clamp Fitting

    £2.15 £2.58 (inc. VAT)
    Short Tee, adjustable from 4° to 10°, often used to join intermediate uprights to top rails and middle rails to end uprights. This cannot be used where through tube has to be joined within the fitting. Powder coating from only £2.00 per fitting.
  • 204 - Slope Range Long Tee Clamp Fitting

    204 - Slope Range Long Tee Clamp Fitting

    £2.40 £2.88 (inc. VAT)
    Slope Range Long Tee, adjustable for slopes from 4° to 10°, often used to join intermediate uprights to top rails and middle rails to end uprights. Powder coating from only £2.00 per fitting.
  • 219 - Slope Range Socket Cross Clamp Fitting

    219 - Slope Range Socket Cross Clamp Fitting

    £2.20 £2.64 (inc. VAT)
    219 - Slope Range Socket Cross An adjustable cross for connecting tubes between mid/lower rails and the vertical on ramps or shallow gradients (4-10o). The vertical tube must be one continuous piece, only cut the cross rails (gradient). Powder coating from only £2.00 per fitting.
  • 224 - Variable Angle Inline Connector Clamp Fitting

    224 - Variable Angle Inline Connector Clamp Fitting

    £2.50 £3.00 (inc. VAT)
    A variable angle in line connector (110° - 180°) Ideally suited for use between the vertical end post and sloping top rail on stair guard railing. Powder coating from only £2.00 per fitting.
  • 225 - Slope Range Elbow Clamp Fitting

    225 - Slope Range Elbow Clamp Fitting

    £2.32 £2.78 (inc. VAT)
    An adjustable elbow used for the connection of a first vertical post at the start of an incline to the top rail. Only one bore has the ability to take the adjustability, the other is fixed. Powder coating from only £2.00 per fitting.
Q-Clamp swivel range.