TG8005 Nickel Anti-Seize Compound

Anti Seize compound for exposed surfaces, flanges and threaded components.  A premium quality nickel based anti seize compound used to reduce corrosion and seizure during component assembly where low levels of sulphur, chlorine and fluorine are required on nimonic, stainless steel and silver coated components, especially where high temperatures may be experienced.

Benefits:    
Resistant to temperatures up to 1420C     
Corrosion and seizure protection     
Prevents galling during assembly       
Resistant to chemical attack     
Enables easy dismantling of components     
Effective anti seize in saturated conditions     
Use on all threaded components

Technical Data:  
Appearance:     Grey smooth compound 
Base Oil:     Solvent refined mineral oil fortified with nickel
Thickener:     Gelled synthetic oil    
Worked penetration (IP50) 355-385   
Salt water corrosion:  No corrosion after 20 hours @ 25C on steel 
Electrical conductivity:  Excellent
Lubricating solid content:  19% nickel 
Temperature range:   -30 to 1420C
Dropping Point:   >260C
Solubility:     Insoluble in water
Size:    500gm

Directions for Use:   
Apply sparingly by brush to threaded components before assembly.
To ensure best performance ensure both threaded surfaces are completely coated.