TG8704 Very High-Temp Grease
Synthetic based graphite grease for very high temperature uses. An industrial, extreme temperature, medium consistency grease for use at temperatures of up to 600C in applications such as oven and kiln car bearings and in furnace door and drying tunnel mechanisms. At very high temperatures, the synthetic based liquid phase evaporates, leaving a dispersion of graphite particles to reduce wear without leaving abrasive carbon ash deposits.
Benefits:
No carbonisation at high temperatures
Extends component life at high temperatures
Graphite lubricating film reduces wear
Synthetic fluid evaporates cleanly
Classified as non hazardous
Technical Data:
Appearance: Smooth shiny black grease
NLGI Classification: 2
Base Oil: Polyalkaline glycol
Thickener: Inorganic
Base Fluid Viscosity: 128 cSt @ 40C, 25cST @ 100C
Solid Lubricant: Graphite (10% micronized content)
Temperature range: -30 to 200C (Grease film) 200 to 600C (Dry film)
Drop Point (ASTM D2265): Nil
Flash Point: >200C
Relative Density: 0.98
Solubility: Insoluble in water
Storage: Store in a cool dry location
Size: 400gm cartridge
Directions for Use:
Apply sparingly, preferably by hand, to the bearing after fitting and before assembly to the bearing housing. Bearing housings should be vented to allow for evaporation of the base fluid.
Can also be applied by high pressure grease gun.
Avoid over-lubrication.
Bearings should be purged of old grease before application.
