Tygris IS13 Mould Release Non-Silicone
Specialist agent for highly effective silicone free release. An excellent alternative to silicone spray for the Plastic Moulding industry. It is a quick drying solvent and oil blend with a vegetable oil base, stable to 220C. it is non-chlorinated and is easily removed by ordinary washing, facilitating further product finishing and making it as versatile as it is effective.
Â
Benefits:
Non-silicone content to allow for overpainting, lacquering, overprinting, gluing or welding Â
Excellent release and flow properties
Virtually odourless mild solvent which flashes off  Â
Effective where a high gloss finish is desirableÂ
Quick dryingÂ
Easily cleaned off with conventional detergents
Â
Technical Data:Â Â
 Appearance:   Colourless thin free flowing liquid Â
Odour:Â Â Â Â Â Virtually odourless
Contents:Â Â Â Blend of vegetable oils in naphtha and hydrocarbon propellants
Storage:Â Â Â Â Â Below 50C
Flash Point:Â Â Â <0C
Temperature range:Â 0-180C (Continuous)Â Â 200C (Intermittent)
Specific Gravity:Â 0.77-0.79
Size: Â Â 400ml can
Directions for Use:
Ensure surface to be coated is clean and dry.
Shake can well before use and spray a light even coat over the surface from a distance of 20-30cm.
Allow solvents to evaporate before placing components into use.