Slope & Swivel Handrail Fittings

Showing 19 of 19 results
  • Two Way Swivel Elbow Clamp Fitting - 125H

    Two Way Swivel Elbow Clamp Fitting - 125H

    £4.90 £5.88 (inc. VAT) £15.88
    125H fitting has been designed as a variable angle in-line connection, adjustable through 202. Powder coating from only £2.00 per fitting.
  • Adjustable Tee Clamp Fitting - 129

    Adjustable Tee Clamp Fitting - 129

    From: £1.80 £2.16 (inc. VAT)
    Adjustable from 30° to 60°, often used on staircase top rails . The through tube cannot be joined within the fitting. Powder coating from only £2.00 per fitting.
  • Adjustable Cross Clamp Fitting - 130

    Adjustable Cross Clamp Fitting - 130

    From: £4.50 £5.40 (inc. VAT)
    Adjustable from 30° to 45°, this Q-Clamp fitting is often used where middle rails on staircases meet intermediate uprights. Powder coating from only £2.00 per fitting.
  • Offset Swivel Tee Clamp Fitting - 147

    Offset Swivel Tee Clamp Fitting - 147

    From: £2.90 £3.48 (inc. VAT) £9.39
    An internal swivel tee used in conjunction with other Q clamp fittings in the range to create a 360° swivel joint. Ideal use on handrail or offset guardrailing down variable angled slopes. Eliminates the requirement for specialised angle fittings. Powder coating from only £2.00 per fitting.
  • Short Swivel Inline Tee Fitting - 148

    Short Swivel Inline Tee Fitting - 148

    From: £3.15 £3.78 (inc. VAT) £5.41
    Sold in packs of 2 as used in pairs to create angles between 85° and 235°. A central tube is required to join the fittings together to create the angle. When working out the correct tube length dimension ‘C’ should be subtracted. Powder coating from only £2.00 per fitting.
  • Double In-Line Swivel Combination Fitting - 167

    Double In-Line Swivel Combination Fitting - 167

    From: £4.40 £5.28 (inc. VAT) £14.00
    Complete double swivel with the swivel connectors at 180° to each other. Each swivel has a travel of approximately 85° from the horizontal in both vertical directions. Powder coating from only £2.00 per fitting.
  • Corner Swivel Clamp Fitting - 168

    Corner Swivel Clamp Fitting - 168

    From: £4.70 £5.64 (inc. VAT) £1,518.00
    90 degree corner swivel complete double swivel with a swivel connection at 90o to each other. Each swivel has a travel of approximately 85o from the horizontal on both vertical directions. Powder coating from only £2.00 per fitting.
  • Swivel Locating Flange Clamp Fitting - 169

    Swivel Locating Flange Clamp Fitting - 169

    From: £2.80 £3.36 (inc. VAT) £925.00
    Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction. Powder coating from only £2.00 per fitting.
  • Single Swivel Clamp Fitting - 173

    Single Swivel Clamp Fitting - 173

    From: £2.40 £2.88 (inc. VAT) £7.95
    Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions. Powder coating from only £2.00 per fitting.
  • Female Swivel Clamp Fitting - 173F

    Female Swivel Clamp Fitting - 173F

    From: £1.15 £1.38 (inc. VAT) £3.85
    This fitting is designed to be used in conjunction with the M fittings and is generally not used on its own. This can be connected to the M fitting by rivet or nut and bolt. For example it will fit 167M, 168M and 169M. Powder coating from only £2.00 per fitting.
  • Slope Range Short Tee Fitting - 201 (153)

    Slope Range Short Tee Fitting - 201 (153)

    From: £2.15 £2.58 (inc. VAT)
    Short Tee, adjustable from 4° to 10°, often used to join intermediate uprights to top rails and middle rails to end uprights. This cannot be used where through tube has to be joined within the fitting. Powder coating from only £2.00 per fitting.
  • Slope Range Long Tee Fitting - 204

    Slope Range Long Tee Fitting - 204

    From: £2.40 £2.88 (inc. VAT)
    Slope Range Long Tee, adjustable for slopes from 4° to 10°, often used to join intermediate uprights to top rails and middle rails to end uprights. Powder coating from only £2.00 per fitting.
  • Slope Range Socket Cross - 219

    Slope Range Socket Cross - 219

    From: £2.20 £2.64 (inc. VAT)
    An adjustable cross for connecting tubes between mid/lower rails and the vertical on ramps or shallow gradients (4-10o). The vertical tube must be one continuous piece, only cut the cross rails (gradient). Powder coating from only £2.00 per fitting.
  • Variable Angle Inline Connector - 224

    Variable Angle Inline Connector - 224

    From: £2.50 £3.00 (inc. VAT)
    A variable angle in line connector (110° - 180°) Ideally suited for use between the vertical end post and sloping top rail on stair guard railing. Powder coating from only £2.00 per fitting.
  • Slope Range Elbow Clamp Fitting - 225

    Slope Range Elbow Clamp Fitting - 225

    From: £2.32 £2.78 (inc. VAT)
    An adjustable elbow used for the connection of a first vertical post at the start of an incline to the top rail. Only one bore has the ability to take the adjustability, the other is fixed. Powder coating from only £2.00 per fitting.

The Qclamp® Slope Range fittings are designed for use on access ramps or other shallow gradients between 4° and 10° and enable a guardrail to be constructed along the length of the slope without the need for specially reamed out fittings or bending the tube.

If you need any further technical support or assistance regarding the use and interpretation of this information then please do not hesitate to contact us

Excluding the use of the stand alone 125H, the Qclamp® Swivel Range is constructed using the relevant male and female fittings. The 173F is common to all such combinations. The range can be supplied in individual components or as complete units using either a rivet or nut and bolt to join the male and female fittings together.

The lugs have been designed to be of equal dimension regardless of the size of the fitting in order that a swivel connection can be created between different size tubes. E.g. a 173F-1 can be combined with a 173M-3 to create a connection between 26.9mm OD and 42.4mm OD tubing. In addition to being used with the 173F to make the swivel combinations, all of the ‘M’ male fittings can be used to secure various types of infill in place.

WARNING: AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING.